3C0 905 218 REH - Taster für Start-Stop Betrieb

[boraxm]

Hallo, alle zusammen! Wer ist auf dem 3C0 905 218 REH - Taster für Start-Stop Betrieb Informationen zur Installation? Ich Alex679 Forum (http://www.passat3c.info/cms_neu/index.php?page=165) sah den Schalter, aber keine Installation Methode, wenn jemand diese Informationen, bitte geben Sie mir eine Vielen Dank! Wenn Alex679 finden dieses Thema, geben Sie bitte helfen, danke!

 

[dieselmartin]

Was willst Du installieren.
Der Schalter wird einfach in das entsprechende Feld geklipst.

Start-Stop macht dann noch keiner, denn das muss dein MotorSTG (und der ganze Rest) unterstützen.

Start-Stop "nachrüsten" würde ich schnell auf das Thema "Neukauf eines Autos" vertagen.

m;

 

[boraxm]

Vielen Dank! CC auf Nun ist das sicherlich eine solche Umstellung installiert werden kann, und ich denke, dieser und der Touareg-Prinzip ist in etwa gleich. Ich habe eine Seite in den Vereinigten Staaten, die Ersatzteile, Produkt-Installation wie folgt sehen:
3C0905218REH
Electrical - Ignition system - Ignition lock - Power switch
Power switch, passat 2009

邓

 

[dieselmartin]

Wie bitte ?
Ich verstehe nicht, was Du sagen willst.

Aber glaub mir, mehr als eine LED und ein Taster sind in dem Schalter nicht drin, also kann er auch nicht mehr bewirken. Und wenn Du noch kein Start-Stop hast, fehlen dir eine Menge Bauteile dazu !

m;

 

[guste100]

The german translation you are posting is hard to understand, if it's understandable at all.

Please post in english and we can help much easier. Please answer Martins question first: What are you planing to do? Are you planing to retrofit the complete start-stop functionality? (That is much more than the push-button).

 

[Alex679]

HI,

ja das ist ein Chinese und er hatte mich auch schon angemailt (Du solltest es wirklich mal nur in englisch probieren). Und wenn ich ihn recht verstehe will er nur wissen wozu der Taster ist und wie er verdrahtet wird....??? Denke, hofffe ich mal.




Alex

 

[boraxm]

Sorry!
What I mean is: I want this switch (3C0 905 218 REH) to make practical use of my car, but do not have the installation information. The switch function and the Touareg's keyless start function is the same?
This model is called in the Chinese market: Magotan, PQ46 platform.
Do not know I say this clearly?
Thanks!
邓

 

[dieselmartin]

This switch is just a switch - to metallic part connected by pressing the button.
It's the same like every other push-button.
There is no such thing like "installation information" since the surrounding system called "start-stop" is much more complex than just adding a button.
Sure, every keyless start function has such a push-button, but no car starts by just throwing a button into the dashboard.

So, you have the part no., buy it and build something. But you will never gain "start-stop" functionality !!!

To understand the difference between "a button" and a "system with a button":
Do you think, installing the electronic brake switch of a Passat somewhere into a Golf enables the Golf with all the features a "Passat and its button" have ?
NO - the Golf does NOT have the motors in the rear brakes, does not have the software to control them and the ESP, that brakes all wheels when the btton is pressed at higher speed than 7 km/h and so on.

But maybe the button looks nice in a Golf

m;

 

[guste100]

The switch function and the Touareg's keyless start function is the same?

No!

The Start-Stop button in the Passat is _NOT_ a manual start button, which would be used with keyless start. The Keyless-Start-Button is a dummy key, which remains in the regular ignition switch hole.

The Start-Stop Button enables / disables a system which automatically stops the engine to save fuel (i.e. when standing in front of a red traffic light or in a traffic jam), and restarts the engine automatically when you're pushing the accelerator pedal again (i.e. when the traffic lights turn green).

Both systems are very complex to retrofit (at least in european cars).

Is the asian Magotan equipped with a immobilizer? If it has an immobilizer, you'd need to place an original key (or the part of the immo, that's contained in it) next to the immo antenna in the car, and you'd need to add a button. But: By doing that, you'd loose the immo function.).

Rgs
Guste

 

[boraxm]

In the Chinese version of B6 (MAGOTAN) circuit in the maintenance of the installation location of the button, and the fuse location and needs of the relay, but without a detailed circuit diagram.

How to upload pictures?


edit by falo: Bitte die Edit-Funktion benutzen.